Using CCIP local simulator in your Foundry project

If you use NPM, install the @chainlink/local NPM package:

npm install @chainlink/local@0.2.2

If you use Yarn, install the @chainlink/local NPM package:

yarn add @chainlink/local@0.2.2

If you use Foundry:

forge install smartcontractkit/chainlink-local@cd3bfb8c42716cfb791174314eba2c0d178551b9

and then set remappings to: @chainlink/local/=lib/chainlink-local/ in either remappings.txt or foundry.toml file

Import the CCIPLocalSimulator contract from the @chainlink/local package:

import {CCIPLocalSimulator} from "@chainlink/local@0.2.2/src/ccip/CCIPLocalSimulator.sol";

You can use Chainlink Local to run CCIP in a localhost environment within your Foundry project. To get started quickly, you will use the CCIP Foundry Starter Kit. This project is a Foundry boilerplate that includes the Chainlink Local package and several CCIP examples.

Prerequisites

In a terminal, clone the CCIP Foundry Starter Kit repository and change directories.

git clone https://github.com/smartcontractkit/ccip-starter-kit-foundry.git && \
cd ./ccip-starter-kit-foundry/

Run npm install to install the dependencies. This command installs the Chainlink Local package and other required packages:
```
npm install
```
Run forge install to install packages:
```
forge install
```
Run forge build to compile the contracts:
```
forge build
```

Test tokens transfers

You will run a test to transfer tokens between two accounts. The test file Example01.t.sol is located in the ./test/no-fork directory. This file contains two test cases:

Transfer with LINK fees: This test case transfers tokens from the sender account to the receiver account, paying fees in LINK. At the end of the test, it verifies that the sender account was debited and the receiver account was credited.
Transfer with native gas fees: This test case transfers tokens from the sender account to the receiver account, paying fees in native gas. At the end of the test, it verifies that the sender account was debited and the receiver account was credited.

For a detailed explanation of the test file, refer to the Examine the code section.

In your terminal, run the following command to execute the test:

forge test --match-contract Example01Test

Example output:

$ forge test --match-contract Example01Test
[⠊] Compiling...
No files changed, compilation skipped

Ran 2 tests for test/no-fork/Example01.t.sol:Example01Test
[PASS] test_transferTokensFromEoaToEoaPayFeesInLink() (gas: 167576)
[PASS] test_transferTokensFromEoaToEoaPayFeesInNative() (gas: 122348)
Suite result: ok. 2 passed; 0 failed; 0 skipped; finished in 8.79ms (976.54µs CPU time)

Ran 1 test suite in 201.00ms (8.79ms CPU time): 2 tests passed, 0 failed, 0 skipped (2 total tests)

Examine the code

Setup

To transfer tokens using CCIP, we need the following:

Destination chain selector
Source CCIP router
LINK token for paying CCIP fees
A test token contract (such as CCIP-BnM)
A sender account (Alice)
A receiver account (Bob)

The setUp() function is invoked before each test case to reinitialize all the variables, ensuring a clean state for each test:

Initialize the CCIP local simulator contract:

ccipLocalSimulator = new CCIPLocalSimulator();

Invoke the configuration function to retrieve the configuration details for the pre-deployed contracts and services needed for local CCIP simulations:
```
(
    uint64 chainSelector,
    IRouterClient sourceRouter,
    ,
    ,
    LinkToken linkToken,
    BurnMintERC677Helper ccipBnM,
) = ccipLocalSimulator.configuration();
```
Note: The configuration function also returns the destination router, WETH9, and CCIP-LnM contracts, but we are not using them in these test cases. Hence, there are commas in the return values.

Initialize the sender and receiver accounts:

alice = makeAddr("alice")
bob = makeAddr("bob")

All the variables are stored in the contract state for use in the test cases.

Prepare scenario (helper function)

The prepareScenario() function is invoked at the beginning of each test case. It performs the following actions:

Request CCIP-BnM tokens for Alice (sender):
```
ccipBnMToken.drip(alice);
```

Approve the source router to spend tokens on behalf of Alice (sender):

amountToSend = 100;
ccipBnMToken.approve(address(router), amountToSend);

Create an array Client.EVMTokenAmount[] to specify the token transfer details. This array and the amount to send are returned by the prepareScenario() function for use in the calling test case:

tokensToSendDetails = new Client.EVMTokenAmount[](1);
Client.EVMTokenAmount memory tokenToSendDetails =
    Client.EVMTokenAmount({token: address(ccipBnMToken), amount: amountToSend});
tokensToSendDetails[0] = tokenToSendDetails;

Test case 1: Transfer with LINK fees

The test_transferTokensFromEoaToEoaPayFeesInLink function tests the transfer of tokens between two externally owned accounts (EOA) while paying fees in LINK. Here are the steps involved in this test case:

Invoke the prepareScenario() function to set up the necessary variables:

(Client.EVMTokenAmount[] memory tokensToSendDetails, uint256 amountToSend) = prepareScenario();

Record the initial token balances for Alice (sender) and Bob (receiver):

uint256 balanceOfAliceBefore = ccipBnMToken.balanceOf(alice);
uint256 balanceOfBobBefore = ccipBnMToken.balanceOf(bob);

Begin impersonating Alice (sender) to perform the subsequent actions:
```
vm.startPrank(alice);
```
Request 5 LINK tokens from the CCIP Local Simulator faucet for Alice (sender):
```
ccipLocalSimulator.requestLinkFromFaucet(alice, 5 ether);
```
Construct the Client.EVM2AnyMessage structure with the receiver, token amounts, and other necessary details.
- Set the data parameter to an empty string because you are not sending any arbitrary data, only tokens.
- In extraArgs, set the gas limit to 0. This gas limit is for execution of receiver logic, which doesn't apply here because you're sending tokens to an EOA.
```
Client.EVM2AnyMessage memory message = Client.EVM2AnyMessage({
    receiver: abi.encode(bob),
    data: abi.encode(""),
    tokenAmounts: tokensToSendDetails,
    extraArgs: Client._argsToBytes(Client.EVMExtraArgsV1({gasLimit: 0})),
    feeToken: address(linkToken)
});
```

Calculate the required fees for the transfer and approve the router to spend LINK tokens for these fees:

uint256 fees = router.getFee(destinationChainSelector, message);
linkToken.approve(address(router), fees);

Send the CCIP transfer request to the router:

router.ccipSend(destinationChainSelector, message);

Stop impersonating (sender):
```
vm.stopPrank();
```

Record the final token balances for Alice (sender) and Bob (receiver):

uint256 balanceOfAliceAfter = ccipBnMToken.balanceOf(alice);
uint256 balanceOfBobAfter = ccipBnMToken.balanceOf(bob);

Verify that Alice's balance has decreased by the amount sent and Bob's balance has increased by the same amount:

assertEq(balanceOfAliceAfter, balanceOfAliceBefore - amountToSend);
assertEq(balanceOfBobAfter, balanceOfBobBefore + amountToSend);

Test case 2: Transfer with native gas fees

The test_transferTokensFromEoaToEoaPayFeesInNative function tests the transfer of tokens between two externally owned accounts (EOA) while paying fees in native gas. Here are the steps involved in this test case:

Invoke the prepareScenario() function to set up the necessary variables. (This step is the same as in the previous test case.)
Record the initial token balances of Alice (sender) and Bob (receiver). (This step is the same as in the previous test case.)
Begin impersonating Alice (sender) and provide her with native gas to pay for the fees:
```
vm.startPrank(alice);
deal(alice, 5 ether);
```

Construct the Client.EVM2AnyMessage structure. This step is the same as in the previous test case. The main difference is that the feeToken is set with address(0) to indicate that the fees are paid in native gas:

Client.EVM2AnyMessage memory message = Client.EVM2AnyMessage({
    receiver: abi.encode(bob),
    data: abi.encode(""),
    tokenAmounts: tokensToSendDetails,
    extraArgs: Client._argsToBytes(Client.EVMExtraArgsV1({gasLimit: 0})),
    feeToken: address(0)
});

Calculate the required fees for the transfer and send the CCIP transfer request along with the necessary native gas:

uint256 fees = router.getFee(destinationChainSelector, message);
router.ccipSend{value: fees}(destinationChainSelector, message);

Stop impersonating Alice (sender) and verify the token balances for Alice (sender) and Bob (receiver). (This step is the same as in the previous test case.)

Next steps

For more advanced scenarios, please refer to other test files in the ./test/no-fork directory. To learn how to use Chainlink Local in forked environments, refer to the guide on Using the CCIP Local Simulator in your Foundry project with forked environments.

Using CCIP local simulator in your Foundry project

Get the latest Chainlink content straight to your inbox.